. |
|
Custom-Parts Verschleißteile Ersatzteile Bekleidung Accessoires |
|
|
S&S, Easy Start gear drive 551 camshaft kit (IOG)
Artikelnummer: 531726 Hersteller: S&S Beschreibung: .550" valve lift. IOG = gear drive cams with Inner & Outer drive Gears. Complete kit with installation hardware; bearings and gasket. Torque for stock 96" Touring bikes. Strongest cam from idle to 4000 RPM for 96" to 106". Not recommended for 10:1 or higher CR. Easy Start Cams make starting easier by reducing the build-up of cranking pressure in the cylinders during starting. This is done by lifting the exhaust valve slightly of its seat; with a spring loaded compression release lobe inside the camshaft. After starting the compression release lobe is retracted by centrifugal force. The only difference is during starting since you will now be able to electric start your Big Inch engine effortless; without the use of big batteries and/or starter motors. A stock starter and battery is enough. When the engine is running the camshafts function as regular cams; without any loss in power; torque or anything else. Note: Required installation kits for Easy Start Cams are included in this co |
inkl. 19% USt. Mehr Informationen >> |